Skip to main content

Fraser Plumbing

Leak Detection & Plumbing FAQs

Leak detection FAQs

Leaks are the most common plumbing problem in a home. They waste water, raise water bills and can weaken a house’s structure. These answers cover the warning signs, the causes, what to do first, and when to call a professional.

FAQ

Answers from Fraser Plumbing

Can’t find what you need? We’re happy to answer your questions and add them here.

Still have a question?

Talk to a Fraser plumber. We’re available 24/7.

Leaks and what causes them

Common causes include:

  • Too much pressure. Plumbing is built to withstand a certain amount of pressure. Put too much stress on the pipes and they will almost certainly leak.
  • Cracks. Outside, check faucets, hose bibs and hoses near any cracks, and look for pooling or spitting water around sprinklers. If you have a pool that keeps needing to be refilled, that is a sign of a leak.
  • Corrosion. Rust and mineral buildup weaken pipes over time and eventually lead to leaks and clogs.

If you find a leaking pipe, cover it with a cloth for the time being and call a plumber to fix it.

Hidden leaks are a big problem, especially when they are close to the mechanical parts of a building. Water damage is among the most expensive types of insurance claim. Finding and repairing leaks:

  • Reduces or eliminates water loss
  • Makes leak damage less likely
  • Means emergency repairs are needed less often

Warning signs of a leak

  • Higher than usual water bills. If your bill keeps going up, check for small cracks and leaks, especially in the bathroom and under sinks.
  • Reduced water pressure. Watch for musty smells, wet carpets and damp walls.
  • Mold and mildew. Mold grows in damp, warm places and usually has a distinct musty odor.
  • Sagging or stained ceilings. Roof and window leaks let in moisture that damages ceilings and walls and encourages mold.
  • Damaged flooring or a damp basement. A musty odor often means water is getting in through the foundation or slab.
  • Rusty pipes. Oxidation or discoloration on pipes can signal a leak that needs attention.

A few simple checks:

  • Examine your water meter.
  • Check your toilets.
  • Make sure your washing machine and its hoses are working properly.
  • Inspect the whole house for water pools or signs of water damage on every floor.
  • Check reachable pipes, drains and valves regularly for oxidation or discoloration.

If you hear running water when no fixtures or appliances are in use, you may have a hidden leak. Check your water meter with everything turned off: if it keeps moving, water is escaping somewhere. Call for leak detection so the source can be found before it causes damage.

Preventing leaks

  • Know where your main water shut-off valve is.
  • Don’t overcrowd sink cabinets. A leaking cabinet can be caused by overcrowding.
  • Sometimes replacing a worn part or pipe is better than repairing it again.
  • Check reachable pipes, drains, valves and washing machine hoses regularly. Plumbing ages like everything else in a home, so take extra care if your home is more than 20 years old.

Yes. Leaky roofs are a common cause of water damage, and the leaks are often too small to notice until they become serious. Keep an eye on your roof, especially as it nears the end of its life.

Clogged gutters and downspouts let water pool, which can lead to roof leaks. Clean them at least twice a year; gutter guards help keep debris out.

Leak emergencies and troubleshooting

If the leak is inside your house or a pipe has burst, shut off the water at the main shut-off valve. If you don’t have a main valve, turn off the water at the meter. Then:

  • Call a plumber right away. Fraser Plumbing is available 24/7 at (619) 332-0275.
  • Avoid touching electrical appliances or devices near the water.
  • Notify your insurance provider of the damage.

Your vent system shouldn’t leak. A vent can let in storm water, but only during an extraordinarily strong storm. If water keeps coming from a vent, the vent may need to be changed; have a plumber inspect it.

The showerhead or aerator may be clogged with buildup. Remove it, soak it in vinegar overnight, then scrub off any remaining buildup with an old toothbrush. If the water pressure is still low, contact a plumber.

  1. Make sure the main water shut-off valve is fully open. It is often in the garage, but the location varies.
  2. If the main valve is open and there is still no water, check the main water line for cracks.
  3. Make sure the supply lines to the fixture are turned on.
  4. Check the aerator for residue and clean it so water can flow freely.

If the problem continues, call a plumber.

Replacing your plumbing

  • Frequent pipe leaks. A lot of cracked or leaking pipes is a sign it’s time to update your plumbing. Take every leak seriously, however small.
  • Discolored water. Darker water can mean the pipes are rusting, which damages them and leads to clogs.
  • Low water pressure. Blockages from rust or corrosion, or leaks, can lower pressure. Have a professional find the cause.
  • Smelly water. An eggy or other unpleasant smell can mean contamination; have the water and pipes checked.

Inspect your pipes regularly: corrosion or fractures mean they need to be replaced. See our plumbing repipe service.

Ready When You Are

Think you have a leak?

Call us 24/7 or send a service request. We’ll find the source and explain the fix before any work begins.

Emergency plumbing, 24/7

Burst pipe, sewer backup or no hot water? We’re open every day, around the clock.

Service Request

Ask a plumber or request service

Describe the leak or the question you have and we’ll get back to you.

Call 24/7

License #1106710

Licensed, bonded & insured

Schedule a service request

Fields marked * are required.

  • This field is for validation purposes and should be left unchanged.

Emergency? Call (619) 332-0275. We answer 24/7.